Home > Products/Support> MEMS Handler 
4664-IH     MEMS Handler

The ULTRA P is a high performance production handler that provides thermal conditioning, full 6 DOF mechanical stimulus and an electrical ATE signal path for testing Micro-Electro-Mechanical Systems (MEMS) Accelerometers and Gyroscopes.  

The system is intended for high volume device manufacturing test, allowing up to 96 devices to be tested in parallel, but may also be used for verification, validation, and device  engineering tasks.  

The ULTRA P is a revolutionary step forward in device handling, thermal, mechanical stimulus and electrical signal performance.   
 
 
FEATURES
・High UPH & Parallel Test Count
・Thermal Accuracy / Stability
・Aerospace Grade Rate / Position
・Signal Path Fidelity / Bandwidth
・Quick & Easy Change Kits
・Full 6 DOF Test Capability
・Magnetic Test Option
・Package Type: LGA, BGA, CSP
・Package Size: 2x2mm or larger
・UPH: 20,000~ at Ambient or Temp.
 

ULTRA P
Feature
Details
Input / Output
JEDEC Tray
16 x Pick & Place Input / Output
Carrier 
Size
136mm x 136mm x 5mm
5.35” x  5.35” x  0.20”
Device Pockets
  2 to 96
Thermal Chamber
Temp Range
  -40°C to +125°C, standard
  -55°C to +150°C, option
Resolution
 0.1°C
Accuracy
±1°C
Stability
±0.1°C
Heat Source
Electric Coil, 5200 watts
Cold Source
LN2, 20-40 PSI
TEMP Control
PID Controller
Temp Measure
User and Chamber Sensors
Rate Stimulus 
Primary Axis
-360° to +360°
Secondary Axis
0° to +90°
Third Axis
0° to +90°
 Constant Mode
Accuracy
±15 Arc Seconds (.005°)
Repeatability
±5 Arc Seconds (.001°)
Rate Range
.0005º/Sec² to 1000º/Sec²
Rate Accuracy
±0.01% of programmed value
 Sinusoidal 
Acceleration
2,000º/Sec²
Speed Range
10 to 500º / second
Freq Range
 1 to 20Hz
DUT IO 
Number of Lines
400 standard, 50Ω
800 optional,  50Ω
Bandwidth
1.5GHz
 
Copyright © TESEC Corporation. All Rights Reserved.